Aironet AP4500 Podręcznik Użytkownika Pobierz pdf (Strona 77)

Utilities

4-9

Loading Firmware for Windows 3.11

and DOS

The FLSH3545.COM program is used to load new ﬁrmware

to systems operating under DOS and Windows 3.11.

To load new ﬁrmware:

1. Before upgrading the ﬁrmware, uninstall the driver or

reboot the computer and do not load the driver during

the boot process.

2. Type FLSH3545 at the DOS prompt.

3. Enter the option (see Table below).

NOTE: If using card and socket services, no options

should be required.

4. Type the ﬁlename of the new ﬁrmware.

5. Press Enter.

Utility Description

-p Speciﬁes the starting address for a block of 64 consecutive

16-bit I/O ports. Make sure the block of I/O addresses does

not overlap the address of another device in the machine.

This can be used to override a card service assignment. If

card services are not used, this will default to 0x140.

-s Optional – If card services are used, this parameter is

ignored. If card services are not used, this is the PC Card

socket the PC Card is inserted into (default is 0).

-m If card services are used, this parameter is ignored. If card

services are not used, this is a block of memory the driver will

use to view the PC Card CIS (default is 0xD000).

-q Quiet Mode, no messages will appear while ﬂash upgrade is

in progress.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 106 107

Brak uwag

Aironet AP4500 Podręcznik Użytkownika Strona 77